Installing Moose Hour/Tach Meter

Post Date:  1-15-2012
Before I ran the bike, I wanted to install an hour meter.  I like the hour/tach combo units by Moose as it is nice to be able to set the idle knowing the RPMs of the bike as well as track the bike's run hours. 

Installation:
1.  I taped one end of the black wire to the end of the spark plug wire, just before the cap, with the long end coming off the end of the spark plug wire.  See pic below:

2.  Next, I wrapped the black wire up, and over the taped end of the wire.

3.  Next, I tapped over the wrapped wire, and continued up the wire. 

4.  I tied the signal wire together with the kill switch wire until just in front of the radiator which is where I mounted the meter with the supplied double stick tape.